Hardware components wastes pyrolysis: energy recovery and liquid fraction valorisation

Pyrolysis of hardware components wastes consisting mainly in computers and television components was performed under nitrogen. The degradation products were separated in three fractions, solid, liquid and gaseous. Analyses of the three phases were carried out using gas chromatography (GC), mass spectrometry (MS), thermal analysis and infrared spectroscopy. The energetic content of the gas phase and the economic value of the liquid phase were also determined. The gas fraction produced was rich in light hydrocarbons and hydrogen. Consequently, its calorific value was high and widely sufficient to make the pyrolysis process self-sustained. The main products of the liquid phase were phenol and isopropylphenol (ca. 50–80 wt.%). The presence of Br-based compounds, deriving from the flame retardant employed in hardware components, were also detected. A controlled combustion of the solid phase permitted to obtain the glass fibres unaltered, which can be recycled.     

Excess enthalpies of aqueous ternary solutions of urea and polyols at 25°C

The heats of dilution of nine ternary solutions of urea and polyols have been determined at 25°C. Excess enthalpies and their virial coefficients h _xy have been evaluated and compared with the data reported in the literature for mono- and polyfunctional alcohols and other oxygenated nonelectrolytes. The group additivity approach of Savage and Wood was applied and the contributions to the enthalpy coefficients, due to the water mediated interactions between urea and the functional groups –CH₂–, –OH, and –O– were determined. On the other hand, by using empirical combination rules among the cross- and self-enthalpic interaction coefficients it is possible to emphasize the large differences in the behavior (even in the presence of urea) of the polyols (and in particular of cyclitols) and of saccharides.     

Cellulose production based on hemicellulose hydrolysate from steam-pretreated willow

The production cost of cellulolytic enzymes is a major contributor to the high cost of ethanol production from lignocellulosics using enzymatic hydrolysis. The aim of the present study was to investigate the cellulolytic enzyme production ofTrichoderma reesei Rut C 30, which is known as a good cellulase secreting micro-organism, using willow as the carbon source. The willow, which is a fast-growing energy crop in Sweden, was impregnated with 1–4% SO₂ and steam-pretreated for 5 min at 206°C. The pretreated willow was washed and the wash water, which contains several soluble sugars from the hemicellulose, was supplemented with fibrous pretreated willow and used for enzyme production. In addition to sugars, the liquid contains degradation products such as acetic acid, furfural, and 5-hydroxy-methylfurfural, which are inhibitory for microorganisms. The results showed that 50% of the cellulose can be replaced with sugars from the wash water. The highest enzyme activity, 1.79 FPU/mL and yield, 133 FPU/g carbohydrate, was obtained at pH 6.0 using 20 g/L carbon source concentration. At lower pHs, a total lack of growth and enzyme production was observed, which probably could be explained by furfural inhibition.     

Synthesis of 2-amino-3-hydroxy- and of 2,3-diamino-3H-1,4-benzodiazepines

A new synthesis of 7-chloro-2,3-diamino-5-phenyl-3H-1,4-benzodiazepines is described, which allows for the preparation of compounds bearing the same or different substituents at the 2 and 3 positions, starting from 2-amino-7-chloro-3-hydroxy-5-phenyl-3H-1,4-benzodiazepines.     

Synthesis of pyrazolo[4,5-d]- and pyrazolo[4,5-c][1]benzazepine derivatives. IV

Following our reports on synthetic tricyclic analogues of antitumor anthramycin the synthesis of some isomers pyrazolo[4,5-d]- and pyrazolo[4,5-c][1]benzazepine derivatives is reported.     

Two 3D supramolecular polymers constructed from an amino acid and a high-nuclear Ln6Cu24 cluster node

The first successful attempt to construct 3D supramolecular frameworks with high-nuclear 3d-4f heterometallic clusters as a node is reported. The self-assembly of Ln3+, Cu2+ and amino acid in solution leads to the formation of two polymers, 35-nuclear complex [Sm6Cu29] 1 with a primitive cubic net-like structure and 36-nuclear complex [Nd6Cu30] 2 with a face-centred cubic network type structure. Glycine and L-proline, respectively, were used as ligands. It should be noted that 2 has a chiral framework. X-ray structure analyses show that 1 crystallizes in the triclinic P1 space group (a=19.6451(8), b=20.4682(8), c=20.7046(8) A, alpha=89.453(1), beta=66.290(1), gamma=68.572(1) degrees, V=7003.0(5) A3 and Z=1) and 2 belongs to the cubic P2(1)3 space group (a=b=c=32.4341(3) A, V=34 119.7(5) A3 and Z=4). Both complexes utilize Ln6Cu24 octahedral clusters as nodes and trans-Cu(amino acid)2 groups as bridges. Electrical conductivity measurements reveal that both polymers behave as semiconductors.     

Matched/Mismatched interaction of a cyclic hexapeptide with ion pairs containing chiral cations and chiral anions

The binding of a chiral quaternary ammonium ion to a cyclopeptide containing aromatic amino acid subunits is affected not only by the configuration of the cation but also by the configuration of the chiral counterion. Analysis of the binding equilibria shows that complex formation involves interaction of the whole ion pair with the host indicating that steric requirements of the anion influence complex geometry and stability.